Integrated Dishwasher repair

If your integrated dishwasher does not fill then please check to see if the water taps at the back of your dishwasher are turned on, and that the pipes are also not squashed or kinked.

In order to be able to fill, it must firstly be able to drain. Please see the issue below “My dishwasher wont empty” for more advice on plumbing drainage.

If you need further help please call our customer service team on 0344 822 4224.

Please check to see if your waste hose has been installed correctly. If your integrated dishwasher empties into an under-sink waste system, then please ensure that the capped end of the waste spigot is removed. Please also check to see if the filter at the bottom of the integrated dishwasher is free from any blockages and is clean.

Check that the pipe has not been kinked or even trapped somewhere, as any of these two can result in the waste water failing to empty out of the integrated dishwasher correctly.

If you need further help please call our customer service team on 0344 822 4224.

Pots and pans can become rusty or brown when they are cleaned in the integrated dishwasher.

Rust can also spread onto other items like the tub of your integrated dishwasher or other cutlery. We would recommend that you refrain from washing pots and pans that are made from cast iron in the integrated dishwasher.

If you need further help please call our customer service team on 0344 822 4224.

If you are noticing, that at the end of a wash cycle, your dishes and / or glasses are appearing to be cloudy or white, then this could be due to a possible deposit of calcium. We recommend that you use our dishwasher salt. This salt, improves wash performance and at the same time protects your dishwasher.

For more information on our range of products, click here – or call the Whirlpool parts team on 0344 822 4224.

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: ON

• LED 7: OFF

• LED 8: OFF

• LED 9: OFF

Action: We recommend you call our customer service centre to book an engineer on 0344 822 4224

Action: Important: LED interfaces only have been included, to show clearly how faults are indicated. DIGIT and LCD (display) interfaces are not included, given the ease with which faults are identified (by F code). When faults are being displayed, the LEDs involved in their identification will remain alight and off, whilst the ON/OFF LED and others on the machine may blink rapidly.

Action:

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: ON

• LED 7: ON

• LED 8: OFF

• LED 9: OFF

Action: We recommend you check that the drain pipe and under sink plumbing for any blockages.

Action: If the fault continues please call our customer service centre to book an engineer on: 0344 822 4224

Action: Important: LED interfaces only have been included, to show clearly how faults are indicated. DIGIT and LCD (display) interfaces are not included, given the ease with which faults are identified (by F code). When faults are being displayed, the LEDs involved in their identification will remain alight and off, whilst the ON/OFF LED and others on the machine may blink rapidly.

Action:

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: OFF

• LED 7: ON

• LED 8: OFF

• LED 9: ON

Action: We recommend you call our customer service centre to book an engineer on 0344 822 4224

Action: Important: LED interfaces only have been included, to show clearly how faults are indicated. DIGIT and LCD (display) interfaces are not included, given the ease with which faults are identified (by F code). When faults are being displayed, the LEDs involved in their identification will remain alight and off, whilst the ON/OFF LED and others on the machine may blink rapidly.

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: OFF

• LED 7: OFF

• LED 8: ON

• LED 9: ON

Action: We recommend you call our customer service centre to book an engineer on 0344 822 4224

Action: Important: LED interfaces only have been included, to show clearly how faults are indicated. DIGIT and LCD (display) interfaces are not included, given the ease with which faults are identified (by F code). When faults are being displayed, the LEDs involved in their identification will remain alight and off, whilst the ON/OFF LED and others on the machine may blink rapidly.

Action: